Advertisement
2-Module Power Chassis User Manual
1. 0 GENERAL DESCRIPTION
The
iConverter
2-Module Power Chassis is powered by a single internal universal
AC or DC power supply and can accommodate up to two
It is ideal for enterprise Local Area Network (LAN) or Metropolitan Area Network
(MAN) applications where remote management and explicit demarcation between
the service provider's equipment and customer's equipment is required.
Fig. 1 2-Module Chassis (Shown without modules installed)
This User Manual describes the following models:
Configuration
2-Module Chassis
2-Module Chassis with
Dying Gasp Support
Wall-Mount Hardware Kit
Blank Module Panel
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
1.1 Dying Gasp Trap
The 8230-1, 8231-1, 8235-1 and 8236-1 chassis feature Dying Gasp Trap, which
reports loss of power input or chassis power supply failure. This feature requires an
iConverter
management module be installed in the chassis. When power failure
occurs, the chassis reserves enough power to keep the installed modules running in
order to send a final SNMP alert to the management software.
iConverter
2-Module AC
2-Module AC
8.5 watts
16.5 watts
8230-0
8230-1
8249-0
8090-0
Page 3
iConverter
2-Module DC
6.6 watts
8231-0
8235-0
8231-1
8235-1
8249-0
8249-0
8090-0
8090-0
media converters.
2-Module DC
16.5 watts
8236-0
8236-1
8249-0
8090-0
Advertisement
