Connecting The Computer And Projector Via The Network; Setting The Projector To Connection Standby Mode - Epson EasyMP EMP-765 Setup Manual

Connecting the Computer and Projector via the Network

Once the connection settings have been completed, start EMP NS Connection on
the computer and connect to the projector. Once the network settings are made, you
can go straight to this connection step each time you would like to connect to a
projector.
Tip :
If using Windows, you can click one of the "
Connection windows to display help information so that you can see descriptions of
various functions.

Setting the Projector to Connection Standby Mode

Procedure
Insert the LAN card into the card slot of the projector. sp.19
1
2
Press the [Power] button on the remote control to turn on the projector.
3
Press the [EasyMP] button on the remote control.
EasyMP standby screen will be displayed.
4
Check that the details displayed in the screen show that the projector is
in connection standby mode using the desired connection method.
" icons that are displayed in the EMP NS
Shows the projector's
status.
Check that the projector is
in connection standby
mode using the desired
connection method.
41