Epson EasyMP EMP-765 Setup Manual page 47

Connecting the Computer and Projector via the Network
4
If the "Projector keyword" is set to "ON", enter the projector keyword
displayed on the EasyMP standby screen on the projector, and click "OK".
5
A network connection is established between the computer and
projector, and the computer screens are projected by the projector.
If using Windows
If using a Macintosh
The EMP NS Connection toolbar is displayed on the computer screen. Use the
toolbar to operate the projector, change options and settings, and disconnect
from the network.
s "Using the Toolbar" in the EasyMP Operation Guide for details on how to
use the toolbar.
Tip :
• If you would prefer the toolbar to not appear during a presentation, you can minimise
the toolbar. When this is done, you can use the remote control to operate and set the
projector. s "Before Using the Projector" - "Using the Remote Control to Operate
the Mouse Pointer (Wireless Mouse Function)" in the User's Guide
• When projecting a PowerPoint file, you can skip to the next slide by pressing the[
button or return to the previous slide by pressing the [
• To switch between computers, such as when changing presenters, start EMP NS
Connection on the other computer and connect. The connection with the current
connected computer will be terminated automatically, and the latter computer will be
connected.
If using Windows
• When Presentation Mode is set to "ON", only images from PowerPoint slideshows can
be projected. Presentation Mode can be turned on and off using the toolbar.
• For details on limitations on the resolution and display colours when projecting
computer images using Network Screen
46
Connections" sp.50
] button.
,
see "Appendices - Limitations on
]