Epson EasyMP EMP-765 Setup Manual page 28

Tip :
• These settings only need to be made once, and will be kept from then on.
• Depending on the driver for the wireless LAN card that you are using, the window
display contents and button names that actually appear may differ from those given
here.
Procedure
1
While referring to the documentation for the wireless LAN card and
computer that you are using, carry out the following steps so that the
wireless LAN card can be used.
• Insert the wireless LAN card into the computer.
• Install the driver for the wireless LAN card.
2
Turn the power for the computer on , and select "Start" - "Connect" -
"Connecting to a Wireless Network" in that order.
3
When the window shown at left below is displayed, click the "Change
advanced settings" button. When the window shown at right below is
displayed, click the "View Wireless Networks" button.
27