Excalibur Water Systems 2.0” High Capacity Premium Flow Series Installation And Operation Manual page 6

Water Softener Reversing Motorized Drive Direction:
Water softener motorized bypass and water softener MAV drives are factory wired with the
white wire on the right when viewing the water softener wiring harness as shown, reversing
the water softener wires reverses the logic of the drive. The water softener wires can be
removed from the housing by holding down the water softener locking tab in the small
window while applying light pressure to the wire, being careful not to disengage the wire
from its crimped on connector. The water softener wires can then be reinserted, being sure
the water softener locking tab re-engages in the window.
1 5