Is There A Maximum Number Of Slave Units That Can Be Attached To A Master Usr4204; Rackmounting The Usr4204 With The Back Panel Facing Out - US Robotics USR4204 User Manual

Is there a maximum number of slave units that can be attached to a
master USR4204?
No, there is no maximum. But as the hierarchy grows, the path can become more
complicated - especially if security is on, as each step in the path would require a separate
username and password.

Rackmounting the USR4204 with the back panel facing out

When rackmounted, the USR4204 front panel will face out by default, but it can be
rackmounted with the back panel facing out.
1. WARNING: Remove all power cords from the USR4204 to prevent shock hazard.
2. Unscrew and remove the rackmount brackets if necessary.
3. Unfasten the top housing by unscrewing the six (6) Phillips-head screws. Save the
screws for step 5.
4. Remove the top housing and position it so the bracket mounting holes are near the
rear panel.
5. Replace the top housing and fasten it with the six (6) Phillips-head screws.
6. Follow the instruction in the Physical Installation section to attach the rackmount
brackets to the USR4204 and install in a rack.
If these troubleshooting tips did not solve your issue contact USRobotics technical support.
USR4204 User Guide
Page 38 of 52