Table of Contents
Advertisement
Configure Ports Menu (Main Menu
Configure Ports Menu "USR4204
CMD
'A' Config
"Console A
'B' Config
"Console B
'C' Config
"Console C
'D' Config
"Console D
'1' Rename
"Power 1
'2' Rename
"Power 2
'-' Return
to MAIN Menu
At the top of the Configure Ports Menu are the menu name and the user-programmable
device name. Below that is a list of valid commands, text, and status. Invalid commands are
ignored.
'A'-'D' Config Console Port
Navigate to the Port Menu of the corresponding serial port to change the rate, format, or
name of the selected port with this command. The current serial port parameters are shown
in parentheses next to the port name.
'1'-'2' Rename Power Port
Navigate to the Rename screen of the corresponding power port to change the name of a
power port with this command. The port name may be up to 32 (displayable) characters in
length. The current power port state (ON or OFF) and RMS load current are shown in
parentheses next to the port name.
'-' Return to MAIN Menu
Navigate back to the Main Menu with this command.
USR4204 User Guide
Z)
"(
"(
"(
"(
"(ON
"(ON
Page 21 of 52
"
9600 None )
9600 None )
9600 None )
9600 None )
0.0 Amps)
0.0 Amps)
Advertisement
Table of Contents
