Table of Contents
Advertisement
Security is enabled by entering an Administrator username and password.
'-' Return to Configure Security Menu
Navigate back to the Configure Security Menu with this command.
Do not forget the administrator name and password! Record and
store all Administrator and User information in a secure location. The
recovery method requires you to be at the physical location of the
USR4204. See
and Password
User Menu (Main Menu
"User 15
CMD
'A' Toggle
"Console A
'B' Toggle
"Console B
'C' Toggle
"Console C
'D' Toggle
"Console D
'1' Toggle
"Power 1
'2' Toggle
"Power 2
'Y' Change
Username
'Z' Change
Password
'W' Deny
All Permissions
'S' Grant
All Permissions
'T' Toggle
User Enable
'P' Toggle
Admin Privil (OFF)
'X' Delete
User
'-' Return
to Configure Security Menu
At the top of the User Menu are the programmable User name and the menu name. Below
that is a list of valid commands, text, and status. Invalid commands are ignored.
Only the Change Username command ('Y') appears until a Username is entered.
'A'-'D', '1'-'2' Toggle Port Permissions
Grant or deny access to the corresponding port for the selected User.
USR4204 User Guide
"
Clearing A Forgotten or Disabled Administrator Name
"
for details.
Y
U
number or letter of user)
" User Menu
(current permissions in parentheses below)
(ON )
Page 29 of 52
" (ON )
" (ON )
" (ON )
" (ON )
" (ON )
" (ON )
Advertisement
Table of Contents
