US Robotics USR4204 User Manual page 24

Default: "-"
Hexadecimal 1Ch is ASCII character ^\ (Ctrl-\).
'M' Change Char for Menu
Change the character for the View Menu command with this command. It navigates to the
Change Character screen.
Default: "-"
'N' Change Char for Xon
Change the character used for Xon flow control with this command. It navigates to the
Change Character screen.
Default: 11h
Hexadecimal 11h is ASCII character ^Q (Ctrl-Q).
'X' Change Char for Xoff
Change the character used for Xoff flow control with this command. It navigates to the
Change Character screen.
Default: 13h
Hexadecimal 13h is ASCII character ^S (Ctrl-S).
'W' Enter Login Banner
When security is enabled, the USR4204 will present this greeting followed by a login
prompt. This command navigates to the Change Banner screen. The banner may be up to
64 (displayable) characters in length.
Default: USRobotics Console Server & Power Switch
'Y' Enter Security Banner
If security and the security banner are enabled, the USR4204 will present a security banner
prior to the login banner. This command is only available when security is on and navigates
to the Change Banner screen. The banner may be up to 256 (displayable) characters in
length. Each occurrence of '\n' (newline) will be replaced with a carriage return/line feed
pair.
USR4204 User Guide
Page 24 of 52