Table of Contents
Advertisement
Product Operation
User interface
The USR4204 user interface is organized into menus. See Figure 1 for a map of all menus.
Each menu contains commands, text, and status where appropriate. Commands listed on
the following pages are shown within single quotes ('), programmable names are shown
within double quotes ("). Commands are single characters that either perform an action or
provide navigation to another menu. Commands are not case-sensitive. Text can be any
alphanumeric or punctuation characters.
Alphanumeric and punctuation include all ASCII characters from 20h to 7Eh.
To access the User Interface open a terminal emulation window on a computer (using
Courier or other fixed-width font) and connect to the USR4204 remotely via modem or
locally via the terminal port using a rolled RJ45 cable. Hit ENTER to show the Main Menu
screen. If security is enabled the login prompt will appear.
Hit the spacebar or the Enter key to refresh any Menu within the User
Interface.
USR4204 User Guide
Page 15 of 52
Advertisement
Table of Contents
