Remotely Connecting And Managing Using Dialup - US Robotics USR4204 User Manual

The attached equipment is now ready to be remotely managed.

Remotely connecting and managing using dialup

To connect to the USR4204 and manage the attached devices at the equipment site, the
user will need a terminal emulation application, a connected modem, and a phone line at
the management site.
From the terminal, dial the phone number of the modem at the equipment site.
Once the modems connect, the USR4204 will send the Main Menu or login prompt to the
management terminal.
If the Main Menu or login prompt does not automatically appear hit ENTER. If
the Main Menu or login prompt still does not appear on the terminal check the
Troubleshooting section.
USR4204 User Guide
Page 14 of 52