JabloCom EYE-02 User Manual page 9

Security agency
http://ARC...
� Editing contacts
To add a new contact by calling, you can call the EYE-02 camera directly from a new phone number while the camera is in
the ENROLL mode.
New contacts may also be added via an SMS command (see chapter 4.2, CONFIG commands).
The most comfortable way of editing contacts is JabloTool software. You may simply edit the numbers or e-mail adresses
and completely customise what events will be reported at which reporting level.
Consider also the possibility connecting the EYE-02 to the security agency Automatic Receiving Centre (ARC, see
section 5.3). If you are not going to use ARC, think about whom should be sent the alarm information. In case
remote location it is useful to add someone who is at camera's place (neighbours, etc.).
If there are no phones saved in the contact list (after installing a new EYE-02 camera or after using the factory reset
function), the camera switches automatically to ENROLL mode (after power on) and waits for an incoming call.
Camera sends e-mails with the reply address noreply@eye-02.info. Please check your e-mail client SPAM
filter to accept e-mails from this address.
JR_EYE-02.ENG.MAN.Manual.19.C-2A
+555123456
ARC
ARC
database
Jablotool DESKTOP - contacts configuration
+555123456
e-mail
From:
+555123456
---------
X i m u r a c e r u m
terunterem co
in tuitatus is?
http ://ARC
- 9 -
From:
+555123456
----------
X i m u r a c e r u m
terunterem co
in tuitatus is?
terunterem co
in tuitatus is?
From: eye-02@...
To: Mr.James
Subject: Alarm
---------------------
Attachments: Video.avi
Ximuracerum terunterem co in
tuitatus is? terunterem co in
tuitatus is?
From:
+555123456
EN