Analog Camera Recording Setup - Exacq Vision User Manual

Analog Camera Recording Setup

Camera Recording Setup
The analog Camera Recording Setup page allows you to enable cameras to record video, and configure the cameras'
recording resolution and recording rate. This page is similar to the IP Camera Recording Setup page, with a few minor recording resolution and recording rate.
differences. The following features are available on the analog Camera Recording Setup page: differences. The following features are available on the analog Camera Recording Setup page:
1. The Camera Position column is the physical input connect that the camera is connecte The Camera Position column is the physical input connect that the camera is connected to on the back of the The Camera Position column is the physical input connect that the camera is connecte
exacqVision system.
2. The Camera Name column shows the assigned name of the camera. The Camera Name column shows the assigned name of the camera.
3. The Video Detected column indicates whether the camera is connected and sending The Video Detected column indicates whether the camera is connected and sending a video signal
system. If so, a green "YES" is shown.
4. The Record Enabled column contains
camera. By default, the check box is selected if a signal is detected. By default, the check box is selected if a signal is detected.
5. The Record Resolution column contains drop The Record Resolution column contains drop-down lists with resolutions supported on each ca
6. To change the resolution for all detected cameras on the system, click To change the resolution for all detected cameras on the system, click on the D1, 2CIF or CIF button.
7. The Record IPS column contains sliders allow you to change the number of images recorded from each camera The Record IPS column contains sliders allow you to change the number of images recorded from each camera The Record IPS column contains sliders allow you to change the number of images recorded from each camera
every second. The available IPS settings can vary between cameras. every second. The available IPS settings
8. Click Apply to activate any changes to activate any changes.
1 1 2
6
page allows you to enable cameras to record video, and configure the cameras' page allows you to enable cameras to record video, and configure the cameras'
This page is similar to the IP Camera Recording Setup page, with a few minor
is shown.
contains check boxes that allow you to enable or disable recording from that boxes that allow you to enable or disable recording from that
down lists with resolutions supported on each camera.
www.exacq.com www.exacq.com
3 4 5
8
on the D1, 2CIF or CIF button.
+1.317.845.5710
+5255.56080817
+44.1438.310163
+31.485.324.347
22
7
a video signal to the
USA (Corporate Headquarters) USA (Corporate Headquarters)
Mexico Mexico
United Kingdom United
Europe Europe