Exacq Vision User Manual page 19


The Network tab displays your system's IP Address, Netmask, Gateway, and Primary DNS server. tab displays your system's IP Address, Netmask, Gateway, and Primary DNS server. tab displays your system's IP Address, Netmask, Gateway, and Primary DNS server.
3
4
NOTE: On a Linux-based system with multiple network interface cards (NICs), the DNS server is the same for all based system with multiple network interface cards (NICs), the DNS server is the same for all based system with multiple network interface cards (NICs), the DNS server is the same for all
the NICs in the system. Therefore, changing the DNS on a single NIC changes the DNS for all the NICs in the the NICs in the system. Therefore, changing the DNS on a single NIC changes the DNS for all the NICs in the the NICs in the system. Therefore, changing the DNS on a single NIC changes the DNS for all the NICs in the
system.
1. Select a network connection from Select a network connection from the Network Interface Settings drop-down list to display its
information. Systems with multiple NICs have more than one entry in the list. information. Systems with multiple NICs have more than one entry in the list. information. Systems with multiple NICs have more than one entry in the list.
2. Enter the IP Configuration information for the network connection. Gateway and Primary DNS Enter the IP Configuration information for the network connection. Gateway and Primary DNS Enter the IP Configuration information for the network connection. Gateway and Primary DNS
information is required to connect with a network time server. Click Apply. information is required t
3. Select the correct bandwidth setting to limit network traffic from the server to client computers the correct bandwidth setting to limit network traffic from the server to client computers and the correct bandwidth setting to limit network traffic from the server to client computers
iSCSI drives, and then c , and then click Apply. NOTE: This setting applies to outbound traffic from all NICs in the
system.
4. Select the IP Reconnection Settings value in seconds. Click Apply. Select the IP Reconnection Settings value in seconds. Click Apply.

The Active Directory/LDAP tab
the LDAP integration document appropriate for your platform found at the LDAP integration document appropriate for your platform found at
https://www.exacq.com/downloads/LDAP/index.html. https://www.exacq.com/downloads/LDAP/index.html.
www.exacq.com www.exacq.com
2
This setting applies to outbound traffic from all NICs in the
tab is used only with systems with an Enterprise license. For more information, see is used only with systems with an Enterprise license. For more information, see
19
1
down list to display its
+1.317.845.5710 USA (Corporate Headquarters) USA (Corporate Headquarters)
+5255.56080817 Mexico Mexico
+44.1438.310163 United Kingdom United
+31.485.324.347 Europe Europe