Ip Camera Recording Setup - Exacq Vision User Manual

IP Camera Recording Setup

1
The IP Camera Recording Setup page allows
and configure the images per second (IPS) recording rate.
1. The Camera Input column is always
2. The Camera Name column shows the assigned name of the camera. The Camera Name column shows the assigned name of the camera.
3. The Video Detected column indicates whether the camera is connected and sending
system. If so, a green "YES" is shown.
4. The Record Enabled column contains
camera. By default, the check box is By default, the check box is selected if a signal is detected; however, you can manually disable recording
on a camera that is connected and sending a signal to the system. on a camera that is connected and sending a signal to the system.
5. The Record Resolution column contains drop The Record Resolution column contains drop-down lists with resolutions supported on each camera.
6. The Record IPS column contains sliders allow you to change the number of images recorded from each camera column contains sliders allow you to change the number of images recorded from each camera column contains sliders allow you to change the number of images recorded from each camera
every second. The available IPS settings can vary between cameras. every second. The available IPS settings can vary between cameras.
7. Click Apply to activate any changes to activate any changes.
2 3
7
page allows you to enable IP cameras to record video, configure
per second (IPS) recording rate. The following features are available on the IP Cameras page:
always 1 for single-channel devices, or incremented for multi
indicates whether the camera is connected and sending a video signal
is shown.
contains check boxes that allow you to enable or disable recording from that
selected if a signal is detected; however, you can manually disable recording
www.exacq.com www.exacq.com
4 5 6
The following features are available on the IP Cameras page:
channel devices, or incremented for multi-channel devices.
boxes that allow you to enable or disable recording from that
down lists with resolutions supported on each camera.
21
configure the recording resolution,
a video signal to the
+1.317.845.5710 USA (Corporate Headquarters) USA (Corporate Headquarters)
+5255.56080817 Mexico Mexico
+44.1438.310163 United Kingdom United
+31.485.324.347 Europe Europe