Exacq Vision User Manual page 26

A Video Mask is used to block an area of a camera's view so that it cannot be seen onscreen in
This can be useful if you don't want system users to see a combination safe or keypad that is in the camera's field of view This can be useful if you don't want system users to see a
for example.
To create a video mask, complete the following steps: To create a video mask, complete the following steps:
1. On the Camera Setup page, click Edit in the Video Mask section. This displays a yellow grid over the live video On the Camera Setup page, click Edit in the Video Mask section. This displays a yellow grid over the live video On the Camera Setup page, click Edit in the Video Mask section. This displays a yellow grid over the live video
from the camera.
2. Draw the mask directly in the grid by left Draw the mask directly in the grid by left-clicking while dragging the cursor over the area of the grid you want to
mask. A green rectangle indicates
3. Click Apply. The yellow grid disappears
masked from both live and recorded video. To clear the mask, click the Clear button. masked from both live and recorded video. To clear the mask, click the Clear button.
area of a camera's view so that it cannot be seen onscreen in live
indicates the masked area.
disappears and green rectangle is replaced by a solid gray rectangle. This area is now
www.exacq.com www.exacq.com
the cursor over the area of the grid you want to
replaced by a solid gray rectangle. This area is now
+1.317.845.5710
+5255.56080817
+44.1438.310163
+31.485.324.347
26
live or recorded video.
is in the camera's field of view,
USA (Corporate Headquarters) USA (Corporate Headquarters)
Mexico Mexico
United Kingdom United
Europe Europe