Exacq Vision User Manual page 5

1
System Installation System Installation Checklist
Quick Start
Installation
See the server's Quick Start Guide for information on installing the hardware. See the server's Quick Start Guide for information on installing the hardware.
Establishing Initial Communications
See the server's Quick Start Guide for information on establishing initial communications from the See the server's Quick Start Guide for information on establishing initial communications from the See the server's Quick Start Guide for information on establishing initial communications from the client software to an
exacqVision Server.
Configure IP Cameras
See the IP Camera Quick Start Guide for information on configuring the camera IP addresses, usernames, and passwords. See the IP Camera Quick Start Guide for information on configuring the camera IP addresses, usernames, and passwords. See the IP Camera Quick Start Guide for information on configuring the camera IP addresses, usernames, and passwords.
This document can be found at http://www.exacq.com/support/specsheets.h This document can be found at http://www.exacq.com/support/specsheets.html.
Setup Mode (see Chapter 4)
System Setup*
Set exacqVision server for static IP address. Set exacqVision server for static IP address.
Configure the system name, time, and time zone. Configure the system name, time, and time zone.
Storage Setup
Ensure all disks are selected for recording except the system drive ("C:\" in Windows or Ensure all disks are selected for recording
Ensure total disk space matches the expected value. Ensure total disk space matches the expected value.
Add IP Cameras
Add IP cameras to the exacqVision servers. Add IP cameras to the exacqVision servers.
Camera Recording Setup (IP cameras)
1
Set resolutions .
1
Set frame rate .
Camera Recording Setup (analog cameras) Camera Recording Setup (analog cameras)
1
Set resolutions .
1
Set frame rates .
Disable cameras that are not connected. Disable cameras that are not connected.
Serial Port Setup
Set up serial port for RS-485 mechanical PTZ control.
Set up serial port for input from serial devices. Set up serial port for input from serial devices.
485 mechanical PTZ control.
www.exacq.com www.exacq.com
+1.317.845.5710
+5255.56080817
+44.1438.310163
+31.485.324.347
5
"/mnt/edvr/0" in Linux) "/mnt/edvr/0"
USA (Corporate Headquarters) USA (Corporate Headquarters)
Mexico Mexico
United Kingdom United
Europe Europe