Motion Event Editor - Oberheim OB 12 Operating Manual

The CURRENT MEASURE parameter shows the numbers of the bars as they pass ((useful during
over-recording to allow optimum placing of any added notes), while the TEMPO field indicates the
metronome time for the recording.
The screen also contains the STOP ([F2]) command for stopping the recording and CLEAR ([F1])
for deleting the data present when the key itself is pressed.
If RESET (button [F3]) is selected, the recording will be returned to bar 1.1.
After you have played the Motion you require, select the DONE option using button [F3] to save
the data in the Motion Location already selected. The display will then signal that saving is in
progress:
The MOTION EVENT EDITOR allows the contents of a Motion to be shown on the display in the
form of events generated by the panel controls. This function also allows you to modify the contents
of the Motion of your choice as you wish, by deleting unwanted events, for example, or creating
new ones.
From the Motion Recorder Main Menu:
Select field 2-MOTION EVENT EDITOR; the display will show the page for selection of the Motion
whose contents are to be displayed:
Use the PLEASE SELECT MOTION LOCATION option to select the Motion to be monitored, then
press button [F2] and the display will show its contents:
As can be seen, the video page is divided into three columns:
The first column on the left shows the position of the event within the Motion expressed in
BAR.CROTCHET.FRAME;
219
OB 12