Table of Contents
Advertisement
OB 12
If the first software installation has not succeeded (because for ex. of transmission faults), the
instrument cannot be switch on in the normal way as in such a case the internal memory content
is not the correct one.
In such a case please proceed with the updating procedure manually by pressing button [ESC]
when you switch it on. The display will show "Waiting for MIDI Data" and will wait for the MIDI
messages concerning the software that has to be installed.
CRC ERROR
It occured an error in the installation of the software up-date (error in reading the datas, transmission
interruption, etc...). Swithc off the instrument and start the installation procedure (see par. 11.1).
DATA LOSS DETECTED – PROGRAM
There is a loss Program datas (by switching the instrument off during the memorization). The
screen displays the unusable Program datas (compared to the maximun number) and one in the
check phase. The unusuable Program will be replaced by default Program.
DATA LOSS DETECTED – TIMBRE
There is a loss Timbre datas (by switching the instrument off during the memorization). The screen
displays the unusable Timbre datas (compared to the maximun number) and one in the check
phase. The unusuable timbres will be replaced by INIT TIMBRE.
240
Hide quick links:
Advertisement
Table of Contents
