Write Program - Oberheim OB 12 Operating Manual

The WRITE PROGRAM function allows a Program to be saved in one of the 256 memory locations
assigned to it. To enable the function, press the [WRITE] from any Program environment video
page; the display will show:
The CURRENT LOCATION field displays the current memory location, and DESTINATION the
one where the Program will be saved. By default, the two fields offer the same memory location: in
this case, if the memorisation procedure is concluded, the Program will be overwritten with
consequent loss of the original settings.
Pressing the [F1] button will confirm the memorisation procedure, and the display will show
everything with the Pop-Up menu:
From the video page shown previously, pressing the [F5] allows a new name to be assigned to the
Program; in this case the display will show:
You can now use the encoder or number keypad to assign a new name to the Program displayed
in square brackets. As the screen-printing on the panel shows, each number pad button offers
three letters of the alphabet as well as the number associated to it. Moreover, the function keys
can be used to recall the following functions:
INS ([F1]) function: inserts a space before the character on which the cursor is located;
CAPS ON/OFF ([F2]) function: selects the type of character (uppercase / lowercase);
DELETE ([F3]) function: deletes the character on which the cursor is located;
To confirm the name assigned to the Program, press button [F4].
221
OB 12