Digital Output Settings - Oberheim OB 12 Operating Manual

OB 12
CONTROLLED
SELECTIONS
PARAMETERS
CHOR.FDBK
processed signal by
CHOR.PRDLY
DELAY LEV.
DELAY FDBK processed signal by
depth of modulation on
DELAY MDPT
the delayed signal by
speed of modulation on
DELAY MRAT
the delayed signal by
REV. LEVEL
By selecting the PEDAL2 folder, you can assign the function of choice to the pedal connected to
the PEDAL [EXP.2] rear connector. The video page is identical to those relating to the PEDAL1
setup procedure.
In this section of the System environment, you can set up transmission of the digital signal in S-
PDIF format. Using the [DIGITAL OUTPUT] port, you can pick up the digital signal generated by
the instrument, useful for high-quality recordings in this format.
From the SYSTEM menu, select field 6-DIGITAL OUT; the following video page will be displayed:
containing the following settings:
STATUS: enables (ON) and/or disables (OFF) transmission of the digital signal.
SOURCE: specifies the output section from which the signal is to be taken.
CONTROLS ON
PANEL
[LEVEL/PARAMETER]
feedback of the of EFFECTS
associates to
Chorus FEEDBACK of
CHORUS
[LEVEL/PARAMETER]
delay to activate of EFFECTS
Chorus associates to PRE-
DELAY of CHORUS
[LEVEL/PARAMETER]
of EFFECTS
Delay level
associates to LEVEL of
DELAY
[LEVEL/PARAMETER]
feedback of the
of EFFECTS
associates to
Delay
FEEDBACK of DELAY
[LEVEL/PARAMETER]
of EFFECTS
associates to
Delay MOD.DEPTH of
DELAY
[LEVEL/PARAMETER]
of EFFECTS
associates to
Delay
MOD.RATE of DELAY
[LEVEL/PARAMETER]
of EFFECTS
Reverb level
associates to LEVEL of
REVERB
CONTROLLED
SELECTIONS
PARAMTERS
delay to activate
REV.PRDLY
controls LOW
(parametric eq.) or the
LOW LEVEL
region of frequency
around 60 Hz (graphic
controls FREQ
(parametric eq.) or the
MID1 LEVEL region of frequency
around 200 Hz (graphic
controls B/C
(parametric eq.) or the
MID2 LEVEL region of frequency
around 600 Hz (graphic
controls Q (parametric
eq.) or the region of
MID3 LEVEL
frequency around 2
KHz (graphic eq.)
controls HIGH
(parametric eq.) or the
HIGH LEVEL
region of frequency
around 6 KHz (graphic
234
CONTROLS ON
PANEL
[LEVEL/PARAMETER]
of EFFECTS
Reverb associates to PRE-
DELAY of REVERB
[LOW] or [60] of
EQUALIZER
eq.)
[FREQ] o [200] di
EQUALIZER
eq.)
[B/C] o [600] di
EQUALIZER
eq.)
[Q] o [2K] di
EQUALIZER
[HIGH] o [6K] di
EQUALIZER
eq.)