Adding Effects To The Sound - Oberheim OB 12 Operating Manual

OB 12
The OB-12 offers an effects section with which
you can add four fully configurable algorithms
to your sound.
The OB-12 allows you to make use of the
following algorithms:
OVERDRIVE: simulates an amplifier
-
brought to saturation. Can be used when
creating timbres which simulate a guitar.
CHORUS: adds space and depth to the
-
sound.
DELAY: produces delayed copies of the
-
signal, such as the echo effect.
REVERB: simulates the diffusion of the
-
sound in enclosed environments, bearing in
mind the reflection and absorption of the
walls.
the controls on the panel are:
[OVERDRIVE]: adds / bypasses the Overdrive effect.
[CHORUS]: adds / bypasses the Chorus effect.
[DELAY]: adds / bypasses the Delay effect.
[REVERB]: adds / bypasses the Reverb effect.
For all the buttons, the same logic applies:
LED on: effect active
-
LED off: effect disabled
-
[LEVEL/PARAMETER]: this button allows you to set whether the four trimmers associated to
the four effects are to be used to regulate the level of each algorithm (LED off) or a parameter
defined in the EFFECTS SETTINGS video pages.
160