Replacing The Headlight Bulb - Yamaha V-Star XVS1100R Owner's Manual

Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
After removal
Before installation
1. Quick fastener
2. Pin
9. Place the ignitor unit panel in the
original position and install the
quick fasteners.
6
NOTE:
_
To install a quick fastener, push its pin
back so that it will protrude from the
fastener head, then insert the fastener
and push the protruding pin in until it is
flush with the fastener head.
_
10. Install the rider seat.
1. Screw (× 2)

Replacing the headlight bulb

This motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1. Remove the headlight unit by re-
moving the screws.
2. Disconnect the headlight coupler,
and then remove the bulb cover.
6-31
1. Headlight bulb holder
3. Unhook the headlight bulb holder,
EAU04189
and then remove the defective
bulb.
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
EW000119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-star xvs1100arcV-star xvs1100rcV-star xvs1100ar

Table of Contents