Step 6 :Attachtheoven To Thewall - Kenmore 721.85062 Installation Instructions Manual

STEP 6 :ATTACHTHEOVEN TO THEWALL
_, WARNING _,
To avoid risk of personal injury or property damage, use will need two people to
install this microwave oven.
1. Carefully lift microwave oven and hang it on
support tabs (See Figure 28) at the bottom of the
mounting plate. Reaching through upper cabinet,
thread power supply cord through the power supply
cord hole in the bottom of the upper cabinet.
See Figure 32.
2. Rotate the microwave oven upward so the top of
oven is against the bottom of the upper cabinet or
cabinet frame.
3. Then insert a bolt down through each hole in the
upper cabinet bottom. See Figure 33.
Tighten the baits until the gap between the upper
cabinet and microwave oven is closed.
4. If wail vented or room vented installation is used,
go to No. 7 on the next page.
II
Power cord
Figure 32
Power cord
hole
Figure 33
16