Step 6 :Attachtheoven To Thewall - Kenmore 721.80032 Installation Insrtuctions

STEP 6 :ATTACHTHEOVEN TO THEWALL
_, WARNING _,
You will need two people to lift this
microwave. Failure to use more than
one person could result in personal
injury.
1. Carefully lift microwave oven and hang it on
support tabs (See Figure 26) at the bottom of the
mounting plate. Reaching through upper cabinet,
thread power supply cord through the power supply
cord hole in the bottom of the upper cabinet.
See Figure 30.
2. Rotate the microwave oven upward so the top of
oven is against the bottom of the upper cabinet or
cabinet frame.
3. Then insert a bolt down through each hole in the
upper cabinet bottom. See Figure 31.
Tighten the bolts until the gap between the upper
cabinet and microwave oven is closed.
4. If wail vented or room vented installation is used,
go to No. 7 on the next page.
II
Power cord
\
Figure 30
cord
hoie
Figure 31
17