Advertisement
2. Convert Surface Burners
for
use
with
LP/
Propane
Gas (see Figure
4)
[Ir_
Unlike the standard gas range, THIS COOKTOP
IS NOT REMOVABLE.
Do not
attempt
to remove
this
cooktop.
a.
Remove the top grates and burner caps.
b.
Remove the natural
gas orifice using a 7ram nutddver,
Save the orifices removed from the appliance for future
use to convert
back to natural
gas.
c.
Replace
with
supplied
0.89ram
orifice.
Tighten
the
orifice
until snug. Do not over
tighten.
d.
Insert the LP/Propane
restrictor
in the cavity
directly
opposite
the electrode,
curved side facing the center of
the burner.
e.
Tighten
the restrictor
securely in place using the screw
supplied.
Do not over tighten,
f.
Remove screw "A".
g.
Insert the choke,
flat side down.
h.
Replace screw "A". Be sure the screw head is in line with
the recess in the choke.
i.
Replace burner
caps and top grates.
Burner
Cap
Screw
Choke
:
:
Restrictor
Screw
Electrode
FIGURE
4
Use caution
when replacing
the burner cap
so the electrode is not damaged,
5/8"
Burner F lame S ize _
_-
FIGURE 5
Note: Air mixture adjustment not required on top burners.
3.
Convert
Oven Burner
Orifice
for LP/Propane
Gas (16,000
BTU*)
a.
Locate the oven burner spud shown in Figure 6.
b.
Using a 1/2" wrench, turn down the adjustable spud,
which injects gas into the oven burner, until snug
against the LP/Propane metering pin (approximately
2-1/2 turns). Do not over tighten.
Oven Burner
Orifice
FIGURE 6
4.
Convert
Waist-High
Broiler
Burner
Orifice
Flame for LP/Propane
Gas (13,500
BTU*) --Self-
Cleaning
Models
Only
a.
Open the oven door.
b.
Locate the broiler burner spud and turn down until
snug
against
the
LP/Propane
metering
pin
(approximately 2-1/2 turns). Do not over tighten.
Advertisement
