Timed Dry Cycle - Haier CGDE700AW User Manual

Français

TIMED DRY CYCLE

1. Press any button except "Off" button to power on.
2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle.
• After powering on, press "Timed-Dry Cycle" button to select "Timed Dry"
program.
3. Press "More Time" And "Less Time" buttons to set a suitable time.
• After setting "Timed-Dry Cycle" to "Timed Dry" , you can press these two
uttons to increase or decrease drying time as you desires.
4-6.Press buttons "Temp", "Cycle Signal", "Wrinkle saver", and "Touch Up" to
define your desired program.
Notes: For "Timed Dry" program, use of buttons "Temp", "Cycle Signal",
"Wrinkle Saver" and "Touch Up" is the same as for auto-programs.
"Sensor Dryness Level" is inactive, pressing of which will get alarms.
7. Press "Start/Pause" button.
19