Boot Priority - Toshiba Qosmio G50 Series User Manual

Setup
This field displays the installed BIOS version and date.
Display
This tab lets you customize your computer's display settings for either the
internal display or an external monitor.
Power On Display
This tab allows you to select the display to be used when the computer is
started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
The Power On Display is supported with some models.
Auto-Selected
LCD + Analog RGB
If the connected external monitor does not support the computer's current
video mode, selecting the LCD + Analog RGB mode will not display any
image on the external monitor.

Boot Priority

Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
"HDD" here refers to the Built-in HDD that is defined in the HDD Priority
Option so that it should be recognized first.
FDD -> HDD -> CD-
ROM -> LAN
HDD -> FDD -> CD-
ROM -> LAN
FDD -> CD-ROM ->
LAN -> HDD
HDD -> CD-ROM ->
LAN -> FDD
User's Manual
Selects an external monitor if one is connected,
otherwise, it selects the internal display (default).
Selects both the internal display and an external
monitor for simultaneous display.
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
hard disk drive, 3. CD-ROM
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. floppy
*1
diskette drive , 3. CD-ROM
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*2
CD-ROM , 3. LAN, 4. hard disk drive.
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. CD-
*2
ROM , 3. LAN, 4. floppy diskette drive
HW Setup
*1
, 2.
*2
, 4. LAN.
*2
, 4. LAN.
*1
, 2.
*1
.
7-2