Toshiba Qosmio G50 Series User Manual page 189

■
Make sure data transfer has ended or turn off the computer, before you:
■
■
Connecting the i.LINK (IEEE1394) cable
To connect the i.LINK (IEEE1394) cable, follow the steps as detailed
below:
In order to use the computer's i.LINK (IEEE1394) port, open the left side
cover. Open the cover by pressing the top right section of the cover to
unlock it.
1. Make sure the connectors are properly aligned and plug the i.LINK
(IEEE1394) cable into the computer.
i.LINK (IEEE1394) port
i.LINK (IEEE1394)
connector
2. Plug the other end of the cable into the device.
Note the following when you use i.LINK:
■
You may need to install drivers for your i.LINK devices.
■
Not all i.LINK devices have been tested. Therefore, compatibility with all
i.LINK devices cannot be guaranteed.
■
Some devices might not support sleep or automatic off functions.
■
Do not connect or disconnect an i.LINK device while it is using an
application or when the computer is automatically shutting it down to
save power. Data might be destroyed.
User's Manual
Connect/disconnect an i.LINK device to/from the computer.
Connect/disconnect an i.LINK device to/from another i.LINK device
that is connected to the computer.
Figure 9-15 Connecting the i.LINK (IEEE1394) cable into the computer
Optional Devices
9-20