Boot Priority; Function Button - Toshiba Satellite A500 series User Manual

If they do not match, the following message appears. You must repeat step 1.
If you enter the password incorrectly three times in a row, the computer will
shut down.
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described in the earlier section,
Display
This tab allows you to customize your computer's display settings for either
the internal LCD screen or for an external monitor.
Power On Display
Allows you to set the display to be used when the computer is booted.
Auto-Selected
System LCD only

Boot Priority

Boot Priority Options
This option sets the priority for booting the computer. You can change the
boot priority from the device list.
Button Setting

Function Button

This feature allows you to set conditions for the Power Button and/or the
other buttons.
Enabled
Disabled
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep mode.
Downloaded from LpManual.com Manuals
User's Manual
Not registered
Incorrect Password!!!
the password, to set a new user password.
If any external display is connected, the power on
display will be in external display only mode.
Otherwise it will be in LCD only mode.
Irrespective of external display connection, the
power on display will be in integrated LCD only
mode.
Enables the function button
Disables the function button
HW Setup and Passwords
How to set
7-3