6-4
Chapter 6: Using the NCR 4430 Emulation Application
Initiation of Buffering
Either the host or the 5944 may initiate message buffering by the 5944
running the 4430 emulation application.
Changing the Initiated Buffering Type
Press 1 below to change the initiated buffering type, or 2 to go to the
next screen.
If you change the initiated buffering type below, the above screen
redisplays showing the new initiated buffering type.
The two screens below only display if host-initiated buffering is
selected. They allow you to specify the information to be buffered first,
as follows:
Account Type (Debit or Credit information)
MSR data
If you select a new information type below to be buffered first, the
above screen redisplays showing the new information type.
Host Init Buffer
1=Change 2=Next
1 = Host Init Buff
2 = 4430 Init Buff
st
Buf AcctType 1
1=Change 2=Next
1 = Acct Type First
2 = MSR Data First