Table of Contents
Advertisement
5-4
Chapter 5: NCR 5945 Diagnostics Specification
Keypad Test
After the correct password is entered, the display changes to:
First line:
DIAGNOSTICS
Second line:
Keypad Test
Function keys #5 and #6 navigate up and down through the menu
items.
Press Enter to execute the Keypad Test, or press Function key #5 to
display the next test on the menu (Display Test). Pressing the Cancel
key exits the Diagnostics Menu and starts the application.
The keypad diagnostics tests that each key on the NCR 5945 keypad
functions. Select the Keypad Test from the DIAGNOSTICS Main
Menu:
First line:
Keyboard Test
Second line:
Key in sequence
Each key on the keypad must be pressed in the defined sequence and
within 30 seconds. Begin test by pressing the keys starting at the top
left corner of the keypad, moving left to right and downward until all
keys have been pressed.
If all key presses are detected properly, the following message
displays:
First line:
Test passed
Second line:
Press any key...
If the exact key sequence is not pressed within the allotted 30 seconds,
the following message displays:
First line:
Test failed
Second line:
Press any key...
Pressing any key on the keypad returns the KEYPAD TEST menu.
Press Function keys #5 and #6 to navigate through the available
diagnostic test menus, or press Cancel to exit the session and restart
the NCR 5945 application.
Hide quick links:
Advertisement
Table of Contents
