Direct Access Tuning; Direct Music Search; Function Settings - Kenwood KDC-U453 Instruction Manual

Direct Access Tuning

1 Press *AM– / #FM+ to select a band.
2 Press DIRECT to enter Direct Access
Tuning mode.
"– – – –" appears on the display.
3 Press the number buttons to enter the
frequency.
4 Press 4 / ¢ ( + ) to search for the
frequency.
To cancel Direct Access Tuning mode, press
or EXIT.
If no operations is done for 10 seconds
after step 3, Direct Access Tuning is
automatically canceled.

Function settings

1 To enter [AUD CTRL] menu (see table below): Press AUDIO.
To enter [SETTINGS] menu (page 15): Press the volume knob to enter [FUNCTION]
mode. Turn the volume knob to select [SETTINGS], then press to enter.
2 Turn the volume knob to make a selection, then press to confirm.
Repeat this step until the desired item is selected/activated.
Press to return to the previous item.
3 Hold to finish the procedure.
[AUD CTRL] : While listening to any source except in STANDBY state...
Item
SW LEVEL SW L –15 — SW L +15: Adjusts the subwoofer output level.
BASS LVL –8 — +8: Source tone memory: Adjusts the level to memorize in each
source. (Before making an adjustment, select the source you want to adjust.)
MID LVL
TRE LVL
EQ PRO
BASS ADJ BASS FRQ
BASS LVL
BASS Q
BASS EXT
Selectable setting
BAS F 60/ BAS F 80/ BAS F100/ BAS F200: Selects the center
frequency.
BAS L –8 — BAS L +8: Adjusts the level.
BAS Q1.00/ BAS Q1.25/ BAS Q1.50/ BAS Q2.00: Adjusts the
quality factor.
B-EX ON: Turns on the extended bass. ; B-EX OFF: Cancels.

Direct Music Search

• Not available if Random Play is selected.
• Not applicable for iPod and Kenwood Music
Editor.
1 Press DIRECT to enter Direct Music
Search Mode.
"– – –" appears.
2 Press the number buttons to enter the
track number.
3 Press 4 / ¢ ( + ) to search for the
music.
To cancel the Direct Music Search Mode,
press or EXIT.
Preset
SW L 0
BAS L +8 BAS L 0
MID L +2 MID L 0
TRE L +3 TRE L 0
BAS F100
BAS L +8 BAS L 0
BAS Q1.00
B-EX ON B-EX OFF
Continued...
13