Kenwood KDC-U453 Instruction Manual page 14

Item
EQ PRO
MID ADJ MID FRQ
MID LVL
MID Q
TRE ADJ TRE FRQ
TRE LVL
EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects
a preset sound mode suitable to the music genre. (Selects [USER] to use the
customized bass, middle, and treble settings.)
B. BOOST BB-L LV1/ BB-L LV2/ BB-L LV3: Selects your preferred bass boost level. ;
BB-L OFF: Cancels.
LOUDNESS LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ; LOUD OFF: Cancels.
BALANCE BAL L15 — BAL R15: Adjusts the left and right speaker output balance.
FADER FAD R15 — FAD F15: Adjusts the rear and front speaker output balance.
SW SET SW ON: Turns on the subwoofer output. ; SW OFF: Cancels.
DTIL SET
HPF HPF THRU: All signals are sent to the speakers ; HPF 100H/ HPF 120H/
HPF 150H: Frequencies lower than 100 Hz/ 120 Hz/ 150 Hz are cut off.
LPF SW LPF THRU: All signals are sent to the subwoofer. ; LPF 85H/ LPF 120H/
LPF 160H: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
SW PHASE PHAS REV (180°)/ PHAS NML (0°): Selects the phase angle of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [LPF THRU] is selected for [LPF SW].)
SPRM SET SPRM ON: Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression. ;
SPRM OFF: Cancels. (Selectable only when playback an AAC/MP3/WMA disc
or a USB device.)
V-OFFSET V-OFF –8 — V-OFF +8 (for AUX) ; V-OFF –8 — V-OFF 0 (for other sources):
Presets the volume adjustment level of each source. The volume level will
automatically increase or decrease when you change the source. (Before making
an adjustment, select the source you want to adjust.)
[HPF] is selectable only for
[SW LEVEL/ SW SET/ LPF SW/ SW PHASE] is selectable only if [SWPRE] is set to [SWPRE SW]. (page 6, 7)
[SW LEVEL/ LPF SW/ SW PHASE] is selectable only if [SW SET] is set to [SW ON].
14
Selectable setting
MID F0.5K/ MID F1.0K/ MID F1.5K/ MID F2.5K: Selects the
center frequency.
MID L –8 — MID L +8: Adjusts the level.
MID Q0.75/ MID Q1.00/ MID Q1.25: Adjusts the quality factor.
TRE 10.0K/ TRE 12.5K/ TRE 15.0K/ TRE 17.5K: Selects the
center frequency.
TRE L –8 — TRE L +8: Adjusts the level.
.
Preset
MID F2.5K MID F1.0K
MID L +2 MID L 0
MID Q1.00
TRE 12.5K
TRE L +3 TRE L 0
POWERFUL NATURAL
BB-L LV1 BB-L OFF
LOUD OFF LOUD LV1
BAL 0
FAD 0
SW ON
HPF THRU
LPF THRU
PHAS NML
SPRM ON
V-OFF 0