Hardware Installation; Inserting The Batteries - Silvercrest OM1008 User Manual

Wireless Optical Mouse OM1008

Hardware Installation

Inserting the Batteries

Please insert the included AA type battery in the wireless mouse,
taking care that the + and – poles point in the required direction,
and switch on the mouse using the On/Off (11) switch on the
bottom.
The control lamp (5) on the top of the wireless mouse lights up if the
battery power runs low. If this happens, please replace the battery
with a new, 1,5 V AA batteries (Mignon).
Should the wireless mouse fail to work, power it off
and back on. Sometimes removing and re-inserting
the batteries will also help.
After inserting the batteries into the mouse, the
indicator (5) will flash several times during automatic
synchronisation with the receiver. When the
synchronisation is completed, the status indicator will
stop lighting.
10 - English
11 On/Off switch
12 Optical sensor
13 Battery
compartment