Pole Mounted Hedge Trimmer Safety Instructions; Fuel Handling - Titan TTL488GDO Safety And Operating Manual

5. Keep a distance between the product and bystanders of at least 15 m.
6. Beware of thrown object.
7. Take care against injury from any device fitted for trimming the filament line length. After
extending new cutting device line always return the product to its normal operating position
before switching on.

POLE MOUNTED HEDGE TRIMMER SAFETY INSTRUCTIONS

1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold
material to be cut when blades are moving. Make sure the product is switched off when
clearing jammed material. A moment of inattention while operating the product may result in
serious personal injury.
2. Carry the product by the handle with the cutter blade stopped. When transporting or storing
the product always fit the cutting device cover. Proper handling of the product will reduce
possible personal injury from the cutter blades.
3. Hold the product by insulated gripping surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the
product "live" and could give the operator an electric shock.
4. Check the hedge for foreign objects before operation, e.g. wire fences.
5. Hold the product properly, e.g. with both hands if two handles are provided. Loss of control
can cause personal injury.
6. Beware of overhead power lines. Do not use the product in any position that causes any part
to come within 10m of overhead electrical lines.

FUEL HANDLING

1. Always disconnect the spark plug connector and let the product cool down, before refuelling
it. Petrol is easily flammable. Never smoke when you are refuelling the product. Do not
refuel the product, if there is an open fire in the vicinity!
2. Always use suitable aids such as funnels and filler necks. Do not spill any fuel on the
product or its exhaust system. There is a risk of ignition. Remove spilled fuel carefully from
all parts of the product. Any residue which may be present must have completely volatilised,
before the product is put into operation!
3. Never use the product in environments where there is a risk of explosion. Exhaust gases
and fuel fumes are noxious. Fuel fumes can ignite.
4. Never breathe in any fuel fumes, when you are refuelling the product. Never fill the tank in
enclosed spaces, such as basements or sheds. There is a risk of poisoning and explosion!
5. Avoid skin contact with petrol.
6. Do not eat or drink, while you are refuelling the product. If you have swallowed petrol or oil,
or if petrol or oil has got into your eyes, then seek the advice of a doctor immediately.
7. Close the tank lid immediately after filling the tank. Make sure that it is properly closed.
8. Never use the product without an air filter.