Specifications
Specifications
Engine Specifications
Engine
EPA & CARB certified
NOTE
The gross horsepower of this engine was
laboratory-rated at our factory in accordance with
SAE J1940 as configured to meet safety,
emissions, and operating requirements. The
actual engine horsepower on this class of engine
may be significantly lower.
Pressure Washer
Specifications
Fuel Capacity
0.97 gallons (3.67 L)
Weight
Height
27.4 inches (69.5 cm)
Width
23.4 inches (59.5 cm)
Length
Fuel
Fuel capacity is 0.97 US gallons (3.67 L).
Use regular unleaded gasoline with a
minimum octane rating of 85.
Oil
Oil capacity is 0.63 qt (0.6 L).
16
6.5 HP OHV CPE
82.7 lbs. (37.5 kg)
37 inches (94 cm)
Spark Plugs
Your pressure washer comes equipped with
a ¾" long reach plug (18mm)
Intermittent use (less than 1 hour/month) or
colder temperatures (below 60°F)
NGK B6ES or equivalent
Moderate use (less than 3 hours/month) or
seasonal temperatures (50-80°F)
NGK B7ES or equivalent
Extreme use (continuous) or hot climates
(80-100°F)
NGK B8ES or equivalent
Make certain the spark plug gap is 0.7 -
0.8mm (0.028 - 0.031 in.).
Valve Clearance
Intake 0.13-0.17mm (0.005 – 0.007 in.)
Exhaust 0.18-0.22mm (0.007 – 0.009 in.)
Rev 70002-20080214