Contents foreword....................3 insert types..................3 operating elements ................4 operating symbols/operation............4 fuel....................... 4 special advice..................5 air supply in the installation room ........... 5 initial startup ..................6 first firing .................... 6 10. heating ....................6 11. putting more wood on the fire ............7 12.
1. foreword You chose an Austroflamm high quality insert – we thank you for your confidence. The correct operation and maintenance of your insert (according to this instruction) are imperative for a trouble-free heating and a long lifespan. Please read the following instruction carefully. 2.
3. operating elements The insert series of 45x, 55x, 65x, 75x, 55x55x stands out because of the extremely simple operation. convection air in-/outlet possible deflection damper (for deflecting flue gases into heat exchanger) or throttle valve door lock operating lever for combustion air flap combustion/convection air inlet 4.
6. special advice • Please mind that all surfaces of the insert heat up extremely during operation. Please use the heat-proof glove, which comes with the insert. Please also make your children aware of this danger and keep them away from the fireplace during operation. •...
8. initial startup • Remove all enclosed documents and accessory parts from the combustion chamber. • Carefully read this user manual. • The first operation of your fireplace should take place at the earliest 4 weeks after the completion of its surroundings, so that all parts can dry out well.
11. putting more wood on the fire • open door slowly, so no turbulences can occur which might cause escaping flue gases. The right moment for putting more wood into the combustion chamber is when all fuel has burnt down to embers.
• leaning the door glass: Swing open the door. Lock sliding mechanism. Unlock swinging latch. • 1.) + 2.) Loosen the left and right bolt on the top of the sliding door. If you have a hinged model, just open the door.
• Do you use dry enough wood? • Is the outside temperture too high (>15C°)? ... the room does not get warm enough? • Are all convection air in-/outlets open? • Does the deflection damper deflect the flue gases through the heat exchanger? •...
21. warranty and guarantee Precondition for a valid guarantee claim is that your AUSTROFLAMM insert was installed and handed over by a certified professional stovefitter and is operated in accordance with the operator’s manual and the local regulations and laws. We guarantee full functionality of the Austroflamm insert carcass for 6 years and all stove components made of steel or cast iron for a full two years from the date of purchase.