NEC Univerge SV8300 Manual page 30

ISDN Terminal
9. A Multiline Terminal can call an ISDN Terminal via Primary Extension or Sub Line. A Multiline Terminal
can be called from an ISDN Terminal via Primary Extension or Sub Line.
10. When a Single Line Telephone/Multiline Terminal calls an ISDN Terminal, it can send the calling station
number to the ISDN Terminal. At this time, ISDN trunk number and local number are also attached to be
sent.
11. Station-to-Station Calling between an attendant console and an ISDN Terminal is not available.
12. In case of Point-to-Multipoint connection, a Single Line Telephone/Multiline Terminal must dial ISDN
Multipoint station number assigned by system data, not the ISDN Terminal number assigned by system da-
ta.
13. When a Multiline Terminal calls an ISDN Terminal or an ISDN Terminal calls a Multiline Terminal, a call-
ing station number is displayed to the called Multiline Terminal or the ISDN Terminal.
In case of Point-to-Multipoint connection, the calling station number displayed is the ISDN station number
assigned by system data. The ISDN Multipoint station number is not displayed.
14. Station-to-Station Calling between a PS station and an ISDN Terminal is available.
15. Only Preset Dialing can be used from an ISDN Terminal, Overlap dialing is not available.
16. Group Calling
This feature terminates a call to all ISDN Terminals or Terminal Adapters accommodated on the same bus.
Group Calling is available for following connections.
• ISDN trunk to ISDN Terminal
• ISDN Terminal to ISDN Terminal
• Single Line Telephone to ISDN Terminal
• Multiline Terminal to ISDN Terminal
17. When the ISDN terminal is called, below calling party number is displayed.
• When the ISDN terminal is called from a single line telephone or Multiline Terminal, either calling
station number or calling party number can be displayed by system data programming.
• When the ISDN terminal is called from another ISDN terminal, the calling party number is dis-
played if the calling party sends the calling party number. If not, the ISDN station number of the
calling party is displayed.
Page 22
UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1