Isdn Terminal - NEC Univerge SV8300 Manual

ISDN Terminal

ISDN Terminal

General Description
This feature provides the system with an ISDN Terminal or Terminal Adapter (TA). The following connections
are available:
ISDN Terminal to ISDN Terminal
•
ISDN Terminal to ISDN Trunk
•
ISDN Trunk to ISDN Terminal
•
ISDN Terminal to Single Line Telephone
•
ISDN Terminal to Multiline Terminal
•
ISDN Terminal to PS
•
Operating Procedure
No manual operation is required.
Service Conditions
1. The 2BRI blade are required.
2. The ISDN Terminal must be locally powered.
3. The following connections are available:
• Point-to-Point connection
• Point-to-Multipoint connection
• National ISDN 1
• AT & T
4. The following features are available. Other service features are not available with ISDN Terminal.
• Individual Terminal Calling (Point-to-Multipoint connection)
• Group Calling (Point-to-Multipoint connection)
• Called Party Recognition Service (DIT)
• DID Addressing
• DID and DOD Addressing
• CPN to Network-Present
• CPN to Terminating User-Display
• Sub Address-Present
• Direct Outward Dialing (DOD)
• Restriction from outgoing call
• Toll restriction
• Station-to-Station Calling
• Station Hunting
Page 20
UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1