Rear Panel Components - TRENDnet ProView TV-IP512P User Manual

Rear Panel Components

The power connection to the camera when fitted with the Infrared lens is split between the camera
body and lens using the power connection adapter cable attached to the infrared lens. All other
cables connect to the camera at the rear panel.
Ethernet Port
Ethernet Port
Reset Button
Audio Line Out
GPIO
Power receptacle
TV-IP512P ProView PoE Internet Camera
Reset button
Rear Panel view of TV-IP512P
Connect to Ethernet LAN. The port is auto MDI-II/MDI-X and auto-
negotiation for port speed.
Use to reset device to factory default settings including IP address and
administrator user name and password.
The audio line out receptacle is a mini-plug audio connection for
speakers.
The I/O connectors on the rear panel (I1+/- and I2+/- are for input,
O+/- are for output, 485+/- are for RS-485); these provide the physical
interface used to send and receive digital signals to a variety of external
alarm devices such as motion or event sensors.
Connect power adapter shipped with the camera and plug into suitable
power source.
Audio Line
Out
9
GPIO
Power
receptacle