The Factory Default Settings - Axis 250S User Manual

The System Options
38

The Factory Default Settings

In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 250S. This is performed in one of two ways:
• By clicking the Restore button from the Maintenance page under System Options. This
action will reset most of the unit's parameters but will save the IP-address, the Subnet
mask and the Default Router.
• By pressing the Factory Default Button, located on the front panel. This option will reset
ALL the parameters currently configured in the unit, i.e. network settings, events, etc.
Follow the instructions below to reinstate the product factory default settings using the
Control Button:
1. Switch off the AXIS 250S by disconnecting the power supply.
2. Press and hold the Factory Default Button pressed, and reconnect the power.
3. Keep the Factory Default Button pressed until the Status Indicator displays yellow (note
that this may take up to 15 seconds), then release the button. When the Status Indicator
displays green (which can take up to several minutes) the AXIS 250S will then have
been reset to its original factory default settings.
AXIS 250S User's Manual