Appendix F - Technical Specifications - Axis 250S User Manual

AXIS 250S User's Manual

Appendix F - Technical Specifications

System Requirements -
DirectX 9.0 are required for viewing video streams.
Physical network connection using RJ-45 twisted pair cable. 10baseT or
Installation -
100baseTX Fast Ethernet.
Management - Remote configuration and status using Web-based tools.
User-controlled resolution, quality and color.
MPEG-2 Video -
Video Resolutions
• QCIF - 160x112 / 160x144 (PAL/NTSC)
• CIF - 352x240 / 352x288 (PAL/NTSC)
• 2CIF - 720x240 / 720x288 (PAL/NTSC)
• 4CIF - 720x480 / 720x576 (PAL/NTSC)
Input for composite video with no termination or 75 Ohm. NTSC and PAL.
Video Input BNC -
Video Input Y/C - Input for S-Video. NTSC and PAL.
Audio Inputs - One 3.5mm microphone input for stereo or mono microphone. One 3.5mm
stereo input for connecting line-in stereo or mono signal.
Stereo microphone input - High sens. Max:-39.0 dBu (25 mVpp)
Stereo microphone input - Low sens. Max:-18.1 dBu (270 mVpp)
Line input - Max:+2.7 dBu (3.0 Vpp)
Supported Network protocols -
Terminal block connector A -
0.1 A). 1 pin for ground.
Terminal block connector B -
communication.
COM Ports - RS-485 on Port 1, RS-232 on Port 2.
Pre/Post Alarm Buffer -
of pre/post alarm video storage.
Serial Connector - One 9-pin D-Sub RS-232, max 115 Kbit/s.
Windows 2000 or XP. Microsoft Internet Explorer 5.5 (or higher) and
TCP/IP, HTTP, FTP, SMTP, NTP, ARP, DHCP, BOOTP, UDP, RTP.
2 digital inputs (max 12V in) and 1 transistor output (max 24V,
2 digital inputs (max 12V in), 2 pins for RS-485 serial
Approximately 3 MB memory allows up to 1 minute (at low bit rate)
Technical Specifications
55