Client System Requirements - Axis 250S User Manual

AXIS 250S User's Manual
Connect the power cable to the unit and
connect it to your main power supply.
Approximately 10-15 seconds after connecting the power supply, the message 'Reply
from 172.21.1.200...' - or similar, is returned within the window. Ensure that the
Power Indicator is permanently lit and that the Network Indicator flashes intermittently.
Exit Ping. The installation is complete. You can now access the server directly from your
browser, as described below.

Client System Requirements

Client computers that will be viewing the video stream from the AXIS 250S MPEG-2 Video
Server should meet the following hardware and software requirements:
• Intel Pentium III 500 MHz processor, or better
• 128 MB RAM
• AGP graphics card with 16 MB video memory and support for DirectDraw®. Ensure that the
latest available driver is used.
• Windows® 2000 or Windows XP (Windows XP requires Service Pack 1)
• Internet Explorer 5.5 or higher
• DirectX® v 9.0 or higher
• A media player (only required for viewing saved MPEG-2 files)
Connect an Ethernet cable to the AXIS
250S and attach it to the network.
Power Indicator
Status Indicator
Installing the AXIS 250S
Network Indicator
13