Bunn ULTRA-2 Installation & Operating Manual page 23

TEMP & TORQUE
Press and hold for five seconds the ULTRA and ICE hidden switches to display the TEMP & TORQUE. The
temperature of each cooling drum and the hot gas temperature will toggle back and forth. The auger torque is
displayed continuously. Press and release the ULTRA and ICE hidden switches to return to HOME SCREEN.
The TEMP & TORQUE mode is typically used for service.
DISPLAY
TEMP & TORQUE
0 0
0 0
67 67°h
36 36°
CLEAN FILTER
Monthly cleaning of the air filter is recommended. Should the air filter become dirty creating a high temperature
problem, the unit will shut down until service is completed to correct the problem.
NOTE: Severe conditions may require more frequent cleaning.
23 32080.0001 021105