Fisher & Paykel OB76 Series User Manual page 36

User preference settings
34
How to change the language
Your oven is preset to use Fisher & Paykel's AERO terminology. This is listed in the languages as
LANG UK ENG. However, you may choose to use an alternative, CONV terminology. This is listed
in the other languages as LANG DCS. To select it, refer to the instructions on how to change the
language below. Note that once you have changed terminologies, all references to AERO in the
user guide should be understood as being equivalent to CONV.
Enter the USER SELECT function and turn the function knob clockwise until LANG UK ENG
1
appears in its display.
PUSH TO
Press
2
CLEAR
terminology, LANG DCS for CONV terminology, LANG USA for US English, LANGUE FRANCE for
Canadian French or LANG ESPANO for American Spanish.
Press the button to activate.
CLOCK
3
Turn the function knob back to OFF.
4
How to reset the oven
This will reset the TEMP (temperature) SCALE, SHORT ALERT, TIME MODE and SHOW CLOCK to
their default settings. SABBATH mode and language settings will remain unaffected.
Enter the USER SELECT function and turn the function knob clockwise until RESET appears in its
1
display.
PUSH TO
Press
2
CLEAR
Press the button to exit the USER SELECT function.
CLOCK
3
Turn the function knob back to OFF.
4
How to lock the control panel
Locking the control panel disables all the buttons and knobs, which can be useful when cleaning
oven surfaces or preventing accidental bumps and unauthorised use. The control panel can only
be locked when the function and temperature are both OFF.
To lock the control panel
PUSH TO
Press the
CLEAR
the clock display. Repeat to unlock.
to toggle through the different languages: LANG UK ENG for AERO
to reset the oven to default settings.
button and hold down for five seconds. The LOCK symbol will appear in