Fisher & Paykel OB76SDDEPX Quick Start Manual

QUICK START GUIDE
BUILT-IN OVEN
Keep this document handy for easy reference.
For detailed information on the features of your oven, see your 'User guide'.
●
Before using your oven, make sure you read the full 'User guide', with special attention to the 'Safety and warnings' section.
●
For contact information or if you require service, assistance or replacement parts, see the end of this document or your 'Service &
●
warranty' booklet.
1 Control panel
PER OVEN
2 Oven vent louvres
3 Oven light
OB76SDDEPX
4 Telescopic sliding shelf (x3)
5 Side rack
6 Oven door and handle
7 Oven seal
Accessories:
8 Meat probe
9 Flat baking tray
!0 Rack
!1 Grid
!2 Pan

THE CONTROL PANEL

Upper Oven Function indicators
(see 'Oven functions')
Fan
Bake Forced
Fan
Bake Forced
Lower Oven Function indicators
(see 'Oven functions')
Control lock indicator
(see 'Locking the control panel')
Timer indicator
(see 'Using the timer')
if lit:
Control panel is locked
if lit:
Timer is

Locking the control panel

counting down
To lock, press and hold the
●
select button until the
control lock indicator comes
on.
To unlock, press and hold the
●
cancel button until the
indicator flashes and then
goes out.
Close door indicator
Scroll
if lit:
Door is open when oven is on
(some functions only). See
'Troubleshooting' in your User guide.

YOUR OVEN

1
2
3
4
5
7
6
Upper Oven
Function dial
sealector button Temperature
UPPER
Fan Maxi Fan Classic
Grill Grill Bake
LOWER
Fan Maxi Fan Classic
Grill Grill Bake
Lower Oven Function halo
selector button
Cooking time indicator
(see 'Automatic cooking') in
User guide
if lit:
Automatic cooking time is set
Stop time indicator
Display
(see 'Automatic cooking') in User
guide
Upper oven
if lit:
Automatic stop time is set
Meat probe indicator
(see 'Using the meat probe') in
Lower oven
User guide
if lit:
Meat probe is in use
(display will alternate between
probe set temperature and internal
Select Cancel
temperature of the meat)
Upper Oven indicator if lit: Oven is on
Lower Oven indicator if lit: Oven is on
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel
NZ AU setting. If you want to set the clock later, follow the steps under 'To change the time'.
When the oven is first switched on at the wall
8
1 The display will flash 24 Hr.
9
10
11
12
3 Press the left and right scroll
buttons to set the time.
It is important that you condition the oven before using it for cooking and baking. Conditioning will burn off any manufacturing
residue and ensure you get the best results from the start. You can condition both ovens at the same time. Follow the steps below.
There will be a distinctive smell and a small amount of smoke during conditioning. This is normal, but make sure the kitchen is well
ventilated.
Upper oven
Temperature
1 Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.
dial
2 Make sure you have set the clock.
indicator
3 Make sure all the shelves are fitted.
UPPER
LOWER
Lower oven
Temperature
Temperature
halo
indicator
4 Press the UPPER oven
selector button
The upper row of function
●
indicators will glow.
The halo around the selector
●
button will glow red.
UPPER
LOWER
7 Press the LOWER oven function button
The lower row of function indicators will
●
glow
The Bake indicator on the top row will
●
continue to glow red, but the rest of the
indicators will go out.

SETTING THE CLOCK

(within the user preference menu)
2 Press the right scroll button to 1 Press and hold the left and right
scroll between 24 Hr and 12 Hr.
Press the select button to
confirm.
●
2 Press the select
3 Follow steps 2-5 left to set the
●
●
4 Press the select button to
confirm.

CONDITION BOTH OVENS

F U N C T O I N
5 Select the Bake 6 Set the temperature to 200
function.
While the oven is heating up, the temperature
The halo will glow white. ●
●
halo will glow red and the temperature indicator
Each function has a
●
will alternately show the actual and set
preset temperature and
temperatures.
so the oven will start
heating at the Bake preset When the oven has reached set temperature, a
●
temperature of 180 o C. tone will sound and the halo will turn white.
F U N C T O I N
9 Set the temperature to 200
8 Select the Bake function.
While the oven is heating up, the temperature
The halo will glow white.
●
●
Each function has a halo will glow red and the temperature indicator
●
preset temperature and will alternately show the actual and set
temperatures.
so the oven will start
When the oven has reached set temperature, a
heating at the Bake preset ●
tone will sound and the halo will turn white.
temperature of 180 o C.
button to exit the clock
To change the time
scroll buttons together
for 3 seconds to enter the user
preference menu.
The display will either show 12 Hr
or 24 Hr
button to
confirm. The display will flash.
time.
At step 2a, you also now have the
ability to scroll between 24 Hr, 12
Hr and OFF (turns the display off).
Refer to the User guide to learn
more about this feature.
E T M P R E T A U E R E T M P R E T A U E R
o C for 30 minutes.
E T M P R E T A U E R E T M P R E T A U E R
o C for 30 minutes.
continued over