Fujitsu Plasmavision P42HTS51E User Manual page 41

• Adjust
Each time or is pressed, the fine-tune adjustment for Tuning is switched.
• Skip
This function specifies whether or not to use the Skip function for the displayed Program No.
Each time or is pressed, the setting is switched.
Off On
[Off]: The Skip function is not available when Channel Up/Down has been selected.
[On]: The Skip function is available when Channel Up/Down has been selected.
Press to store.
* Select [On] when you want to skip the channels that they are not broadcasting programs.
Name
An eight-character name can be specified for each Program No.
Press or to select the character input position, and
When the input is completed, press
* When switching the programs, etc., the OSD becomes the indication by the stored name.
Sort
This function sorts the name, the data and the contents of stored programs.
Press or to select To (edit destination)/From (edit source), and
Press to store.
OTHER SETTINGS
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press to select the "Time".
Press to select the amount of time before the standby state starts.
Press to store.
* The numerical value is the approximate amount of time before the standby state starts.
You can assign the black or white color for the background color at the no signal state.
Press to select the "Background".
Press to select the displayed background displayed.
Black White
Press to store.
* The background color changes to assigned color state after approximate 20 seconds at the no signal state.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
or to switch through the characters.
to store.
or to switch the Program No.
Auto Off-NO SIG. settings
screen
E-41