Fujitsu Plasmavision P42HTS51E User Manual page 40

OTHER ADJUSTMENTS (Continued)
SETTING THE INPUT TERMINALS
• Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time is pressed, the setting is switched.
Press to store.
* RGB input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press or
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press to store.
CHANNEL SETTING
Press or to select the items for setting. It is switched as shown as below.
Press to proceed to the next step.
Auto Store
Press or to select the country or region, and then press
All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
* Several minutes are required to scan all the channels. To cancel the operation in progress, press
* See page E-47 for the selectable TV frequencies.
Manual Store
Press or to select the Program No. to be stored.
Press or to select the Manual Store items to be set (Setting or Name). Press
Setting
Press or to select the setting item.
• Freq.
Each time or is pressed, the TV frequency is switched.
• System
Each time or is pressed, the TV SYSTEM is switched.
E-40
, one of the available modes appears in the following sequence:
.
to proceed.
Input Terminal Settings Screen
.
Channel Settings Screen