Other Adjustments - Fujitsu Plasmavision P42HTS51E User Manual

OTHER ADJUSTMENTS

• FEATURES setup screen has the following 5 options.
See Page E-33 for the basic operation procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-39.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-40.)
[Channel Setting]: Can make channel settings. (See P. E-40.)
[Others]: Used to make Screen Orbiter and other settings. (See P. E-41–E-43.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with , and then adjust with
Adjustment Item
Dot Clock You may find the vertically-striped pattern in pictures,
(mD-sub) depending on the clock frequency of your PC's processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the "Dot Clock".
Clock Phase Pictures and the outline of letters may blur or flicker as the
(mD-sub) clock phase of your PC may be different. In this case, adjust the
clock phase manually. Normally, the automatic setting ensures
the optimal value.
Clamp Position Adjusts the extremely dark or bright pictures. Normally, the
(mD-sub,Comp. automatic setting ensures the optimal value.
video)
Auto Calibration Adjusts the dynamic range of images to the optimum.
(mD-sub) Performed while a white screen signal is received.
E-38
. Finally, press
Contents of Adjustments
to implement the adjustments.
Use to adjust to minimize vertically-
striped pattern in pictures.
Use to adjust to minimize pictures blur.
Use to adjust pictures optimally.
Display the Auto Calibration screen and select
Execute, and then use
item.
Operation
to select the